Provider: DSpace RIS Export
Database: Massey Research Online (MRO) Production Instance
Content: text/plain; charset="UTF-8"
TY - THES
AB - This thesis describes the development and application of modern control techniques to an industrial processing plant. The plant is made up of a pilot scale triple effect Wiegand falling film evaporator and a De Lavel tall form spray drier situated at the laboratories of the New Zealand Dairy Research Institute. The continuous version of the standard state space and measurement equations for linear, time-invariant, multi-variable systems provides the basis for the development. This standard representation is not well suited for direct application to the plant because of the difficulty in defining a suitable state vector and the difficulty in knowledge of the process dynamics. The standard representation is therefore enhanced to provide a modified structure that exhibits several significant features:- i) only measurable outputs, control inputs and measurable disturbances are involved in the process descriptions; ii) the equation structure is similar to that of the standard discrete state space equations, so that state space time domain control system design methods are applicable; iii) the structure is suitable for the direct application of statistical modelling; iv) maximum flexibility is offered for selection of discrete intervals for measurement samples and controls; v) precise knowledge of process time delays is not required. Application of the control strategies is performed using an IBM System/7 minicomputer. A suite of computer programs, developed in FORTRAN, is used. These programs are suitable for transferring to any other minicomputer supporting a multi-tasking mode of operation with the major system dependent area being the actual sampling of process data. Whilst a control engineer would be required for the installation of the software and initial control system design, further tuning of the controllers could be performed by a suitably trained operator. The procedures described allow an operator to apply sophisticated control techniques by following a sequence of relatively simple steps:- a) apply perturbations to normal plant operating conditions; b) use the interactive graphics facility to identify process models using the generalised least squares technique; c) choose appropriate design weightings and use a dynamic programming algorithm to obtain controller gains; d) simulate operation of the controller using the process model; e) apply the controller to the actual plant. Steps b), and c) and d may need to be repeated until a suitable controller is obtained. The results of the implementation of controllers on the pilot scale plant are presented. Consistent control of the product density and flowrate from the evaporator is obtained. As an hierarchical control structure has been used on the evaporator, the development of lower level controllers on variables such as steam flowrate, preheat temperature, inlet milk flowrate and condenser water temperature is also described. On the spray drier environmental control on concentrate flowrate, gas flowrate and drier chamber pressure is obtained.
N2 - This thesis describes the development and application of modern control techniques to an industrial processing plant. The plant is made up of a pilot scale triple effect Wiegand falling film evaporator and a De Lavel tall form spray drier situated at the laboratories of the New Zealand Dairy Research Institute. The continuous version of the standard state space and measurement equations for linear, time-invariant, multi-variable systems provides the basis for the development. This standard representation is not well suited for direct application to the plant because of the difficulty in defining a suitable state vector and the difficulty in knowledge of the process dynamics. The standard representation is therefore enhanced to provide a modified structure that exhibits several significant features:- i) only measurable outputs, control inputs and measurable disturbances are involved in the process descriptions; ii) the equation structure is similar to that of the standard discrete state space equations, so that state space time domain control system design methods are applicable; iii) the structure is suitable for the direct application of statistical modelling; iv) maximum flexibility is offered for selection of discrete intervals for measurement samples and controls; v) precise knowledge of process time delays is not required. Application of the control strategies is performed using an IBM System/7 minicomputer. A suite of computer programs, developed in FORTRAN, is used. These programs are suitable for transferring to any other minicomputer supporting a multi-tasking mode of operation with the major system dependent area being the actual sampling of process data. Whilst a control engineer would be required for the installation of the software and initial control system design, further tuning of the controllers could be performed by a suitably trained operator. The procedures described allow an operator to apply sophisticated control techniques by following a sequence of relatively simple steps:- a) apply perturbations to normal plant operating conditions; b) use the interactive graphics facility to identify process models using the generalised least squares technique; c) choose appropriate design weightings and use a dynamic programming algorithm to obtain controller gains; d) simulate operation of the controller using the process model; e) apply the controller to the actual plant. Steps b), and c) and d may need to be repeated until a suitable controller is obtained. The results of the implementation of controllers on the pilot scale plant are presented. Consistent control of the product density and flowrate from the evaporator is obtained. As an hierarchical control structure has been used on the evaporator, the development of lower level controllers on variables such as steam flowrate, preheat temperature, inlet milk flowrate and condenser water temperature is also described. On the spray drier environmental control on concentrate flowrate, gas flowrate and drier chamber pressure is obtained.
M3 - Doctoral
PY - 1979
KW - Spray drying
KW - Automatic control
PB - Massey University
AU - Wong, Owen
TI - Computer control of the manufacture of spray dried milk powder : a thesis presented in fulfilment of the requirements for the degree of Doctor of Philosophy in Industrial Management and Engineering at Massey University
LA - en
VL - Doctor of Philosophy (Ph.D.)
DA - 1979
UR - http://hdl.handle.net/10179/3643
ER -