Show simple item record

dc.contributor.authorBiersteker, Ronald John
dc.date.accessioned2017-09-26T19:44:47Z
dc.date.available2017-09-26T19:44:47Z
dc.date.issued1995
dc.identifier.urihttp://hdl.handle.net/10179/12006
dc.description.abstractThis research project concerns the design of a rapid response, computer integrated Printed Circuit Board (PCB) Component Assembly System (CAS). The CAS system forms an integral part of a commercially viable Manufacturing Pilot Plant (MPP) for the design, production, and assembly of high quality special purpose PCBs in low volumes. The design of the CAS system begins with the identification of the characteristics and deficiencies of conventional low volume, high variety PCB manufacturing systems. Next, a vision for the MPP as a whole is presented, with particular emphasis on the CAS system. A Generic Manufacturing System Design Methodology (GDM) is then derived, and is applied to the design of the CAS system. Through the GDM a working CAS system is constructed, based around a central CAS Master and 3 assembly workstations. The working CAS system is then analysed through a comparison with a typical conventional low volume manual assembly system. The results support the expectation of superior performance from the envisioned system. Finally, areas requiring further work are identified.en_US
dc.language.isoenen_US
dc.publisherMassey Universityen_US
dc.rightsThe Authoren_US
dc.subjectInteractive computer systemsen_US
dc.subjectManufacturing processes -- Automationen_US
dc.subjectProduction controlen_US
dc.subjectData processingen_US
dc.subjectPrinted circuitsen_US
dc.subjectDesign and constructionen_US
dc.titleA computer integrated manufacturing system for small scale production of electronic units : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Production Technology at Massey Universityen_US
dc.typeThesisen_US
thesis.degree.disciplineProduction Technologyen_US
thesis.degree.grantorMassey Universityen_US
thesis.degree.levelMastersen_US
thesis.degree.nameMaster of Technology (M. Tech.)en_US


Files in this item

Icon
Icon

This item appears in the following Collection(s)

Show simple item record