Seed extraction methods and quality effects in Pinus radiata D. Don : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Applied Science in Seed Technology at Massey University, Palmerston North, New Zealand
Loading...
Date
1997
DOI
Open Access Location
Authors
Journal Title
Journal ISSN
Volume Title
Publisher
Massey University
Rights
The Author
Abstract
The current study aims to investigate the effectiveness of various heated air and
microwave oven treatments on seed extraction efficiency and subsequent seed quality
in Pinus radiata. Radiata pine cones were collected from Fox ton from a commercial
plantation and used in preliminary studies considering a range of both heated air and
microwave oven treatments. Cones of different genetic families were collected from
an open pollinated seed orchard owned by Carter Holt Harvey Forests at Matakana
Island.
In the air oven extraction method temperature and duration combinations of 50°C and
24 hours or 60°C and 1 2 hours were found to be most suitable for seed extraction
while giving good seed quality in preliminary experiments. A temperature of 40°C
was found to be too low for efficient seed extraction while 70°C was found to be
lethal to seeds. Various temperature and duration combinations gave similar results
since a decrease in extraction temperature could, in some cases, be compensated by
an increase in the extraction period.
Exposure of cones in a microwave oven affected germination, particularly when only
1 or 2 cones were heated at each exposure time. However when 3-5 cone samples
were used heating for 30 or 40 seconds was sufficient to break scale resin bonding.
Ambient storage of treated cones for up to 7 days following microwave oven
treatment allowed full scale reflexing and high seed extraction efficiency.
Cones from 1 0 diff erent families showed variable germination responses to different
seed extraction conditions. Two families showed consistently high germination across
all treatments while the rest showed reduced germination. Whether this reflects
genetic differences in cone serotiny, seed thermosensitivity differences, cone wood
density, resin bond strength, or is related to seed size and/or moisture content is not
known. Seedling dry weight was not affected by extraction temperature and/or
duration of heating, being found to be more a function of seed size.
Description
Keywords
Pinus radiata, Seeds