Massey Documents by Type

Permanent URI for this communityhttps://mro.massey.ac.nz/handle/10179/294

Browse

Filters

20211

Settings

Has files: YesSubject: search.filters.subject.Humidity

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Aspects of the development of Ixodes anatis under different environmental conditions in the laboratory and in the field
    (BioMed Central Ltd, 2021-12) Bansal N; Pomroy WE; Heath ACG; Castro I
    BACKGROUND: Numerous laboratory and fewer field-based studies have found that ixodid ticks develop more quickly and survive better at temperatures between 18 °C and 26 °C and relative humidity (RH) between 75 and 94%. Ixodes anatis Chilton, 1904, is an endophilic, nidicolous species endemic to North Island brown kiwi (Apteryx mantelli) (NIBK) and the tokoeka (Apteryx australis), and little is known about the environmental conditions required for its development. The aims of this study were to determine and compare the conditions of temperature and RH that ensure the best survival of the kiwi tick and the shortest interstadial periods, in laboratory conditions and outdoors inside artificial kiwi burrows. METHODS: Free-walking engorged ticks were collected off wild kiwi hosts and placed in the laboratory under various fixed temperature and humidity regimes. In addition, sets of the collected ticks at different developmental stages were placed in artificial kiwi burrows. In both settings, we recorded the times taken for the ticks to moult to the next stage. RESULTS: Larvae and nymphs both showed optimum development at between 10 °C and 20 °C, which is lower than the optimum temperature for development in many other species of ixodid ticks. However, larvae moulted quicker and survived better when saturation deficits were < 1-2 mmHg (RH > 94%); in comparison, the optimum saturation deficits for nymph development were 1-10 mmHg. CONCLUSIONS: Our results suggest that the kiwi tick has adapted to the stable, but relatively cool and humid conditions in kiwi burrows, reflecting the evolutionary consequences of its association with the kiwi.
  • Thumbnail Image
    Item
    Laser ablation assisted micropattern screen printed transduction electrodes for sensing applications
    (Nature Publishing Group, 28/04/2022) Rehmani MAA; Lal K; Shaukat A; Arif K
    In this work we present a facile method for the fabrication of several capacitive transduction electrodes for sensing applications. To prepare the electrodes, line widths up to 300 μm were produced on polymethyl methacrylate (PMMA) substrate using a common workshop laser engraving machine. The geometries prepared with the laser ablation process were characterised by optical microscopy for consistency and accuracy. Later, the geometries were coated with functional polymer porous cellulose decorated sensing layer for humidity sensing. The resulting sensors were tested at various relative humidity (RH) levels. In general, good sensing response was produced by the sensors with sensitivities ranging from 0.13 to 2.37 pF/%RH. In ambient conditions the response time of 10 s was noticed for all the fabricated sensors. Moreover, experimental results show that the sensitivity of the fabricated sensors depends highly on the geometry and by changing the electrode geometry sensitivity increases up to 5 times can be achieved with the same sensing layer. The simplicity of the fabrication process and higher sensitivity resulting from the electrode designs is expected to enable the application of the proposed electrodes not only in air quality sensors but also in many other areas such as touch or tactile sensors.