Show simple item record

dc.contributor.authorLim, Yuen Feung
dc.date.accessioned2010-05-17T02:26:52Z
dc.date.availableNO_RESTRICTIONen_US
dc.date.available2010-05-17T02:26:52Z
dc.date.issued2009
dc.identifier.urihttp://hdl.handle.net/10179/1312
dc.description.abstractAn enzyme treatment process for the pre-tanning of sheepskins has been previously reported by the Leather and Shoe Research Association of New Zealand (LASRA) as an alternative to current industry operations. The newly developed process had marked benefits over conventional processing in terms of a lowered energy usage (73%), processing time (47%) as well as water use (49%), but had been developed as a “proof of principle’’. The objective of this work was to develop the process further to a stage ready for adoption by industry. A process ready for adoption by industry is one that is able to generate good quality products (good quality products are those that has solids removed to industry standards, without visible damages to grain surface, evenly dyed etc.), require minimal changes to plant or operation layout and reduce usage of resources (e.g. water and chemicals). Mass balancing was used to investigate potential modifications for the process based on the understanding developed from a detailed analysis of preliminary design trials. Results showed that a configuration utilising a 2 stage counter-current system for the washing stages and segregation and recycling of enzyme float prior to dilution in the neutralization stage was a significant improvement. Benefits over conventional processing include a reduction of residual TDS by 50% at the washing stages and 70% savings on water use overall. Benefits over the un-optimized LASRA process are reduction of solids in product after enzyme treatment and neutralization stages by 30%, additional water savings of 21%, as well as 10% savings of enzyme usage. The optimized (new) LASRA process uses existing equipment and requires no additional outlay of capital. The process is now developed to a point where it should be trialled at industrial scale.en_US
dc.language.isoenen_US
dc.publisherMassey Universityen_US
dc.rightsThe Authoren_US
dc.subjectSheepskin processingen_US
dc.subjectSheepskin tanningen_US
dc.subject.otherFields of Research::290000 Engineering and Technology::291500 Biomedical Engineering::291503 Biomaterialsen_US
dc.titleOptimisation of an enzyme treatment process for sheepskins : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Bio-Process Engineering at Massey University (Manawatu), New Zealanden_US
dc.typeThesisen_US
thesis.degree.disciplineBio-Process Engineeringen_US
thesis.degree.grantorMassey Universityen_US
thesis.degree.levelMastersen_US
thesis.degree.nameMaster of Engineering (M.E.)en_US


Files in this item

Icon
Icon

This item appears in the following Collection(s)

Show simple item record