Show simple item record

dc.contributor.authorShahzad, Wajiha Mohsin
dc.contributor.authorShahzad, Wajiha Mohsin
dc.date.accessioned2011-09-21T03:49:36Z
dc.date.available2011-09-21T03:49:36Z
dc.date.issued2011
dc.identifier.urihttp://hdl.handle.net/10179/2685
dc.description.abstractOff-site manufacturing (OSM) of building components could be leveraged to improve the reported low productivity trend in the New Zealand (NZ) construction industry. Despite the numerous known benefits of OSM, the uptake of the technology in the industry has been discouragingly low. Previous studies offer little help in terms of prioritising identified barriers to the uptake of OSM. As a result, improvement efforts have been daunted by numerous barriers in the face of limited resources. This study aims to contribute to bridging the gap in the extant literature by identifying and prioritising the key constraints to the industry-wide uptake of prefabrication and the improvement measures. Through a nation-wide survey of consultants, contractors, employers and manufacturers, feedback was received and analysed using the multiattribute analytical technique. Results show that the broad categories of constraints to the adoption of prefabrication in NZ are (in order of decreasing impact and relative contributions): industry and market culture (16.2%), skills and knowledge (15.5%), logistics and site operations (14.8%), cost/value/productivity (14%), supply chain and procurement (13.7%), process and programme (13.6%), and regulatory (12.2%). The subcomponents of the broad constraint categories and their relative levels of impact on the uptake of the technology were reported. In addition to addressing the key barriers identified in the study, further measures for improving the uptake of the technology in New Zealand include promotion by client through specifying OSM in the design briefs, improved education and training on the use of OSM, more marketing/ awareness campaign on the benefits of the technology and better supply chain management and transportation logistics. To enable a methodical evaluation of the marginal value achievable by the use of a variant of OSM over and above that of the traditional stick-built system at the design and life-cycle phases of the procurement process, a decision support model was developed. The model incorporates the key performance indicators (KP1s) underlying clients’ value system at the development and operational phases and compares the extent to which each variant of OSM delivers each value criterion relative to the conventional system. The sum of the marginal values at each phase of the procurement iii | P a g e system provides the rationale basis for choosing either the OSM variant or the conventional system based on the approach that delivers the highest marginal value. The model application to real life project was demonstrated using the modular variant of the OSM compared to the conventional stick-built system. Results of the model application at the development phase shows that the OSM was more beneficial to the client than the conventional system with an overall marginal value of 34% relative to the conventional construction approach. Individual results showed 22% improvement in the completion time for the project, 9% improvement in quality and 3% reduction in the carbon footprint at the development phase. However, the technology was found to be 2.4% more expensive than the traditional stick-built system. Results of the model application at the operation and life-cycle phases also show that the technology achieved superior value compared to the conventional stick-built system. The overall marginal value achieved by the modular OSM application at the operation phase was 49% compared to the traditional stick-built system; this comprised 23% reduction in the running and maintenance costs, 18% reduction in the maintenance frequency of the structure and fabric, and an annual 8% reduction in the carbon footprint. Overall, the use of modular variant of the OSM was found to deliver superior value to clients compared to the conventional system at the development, operational and lifecycle phases of the procurement process.en_US
dc.publisherMassey Universityen_US
dc.rightsThe Authoren_US
dc.subjectPrefabricationen_US
dc.subjectOffsite manufactureen_US
dc.subjectProductivity improvementen_US
dc.subjectIndustrialised buildingen_US
dc.titleOffsite manufacturing as a means of improving productivity in New Zealand construction industry : key barriers to adoption and improvement measures : a research thesis submitted in fulfilment of the requirements for the degree of Masters of Construction Management at Massey University, Albany, New Zealanden_US
dc.typeThesisen_US
thesis.degree.disciplineConstruction
thesis.degree.grantorMassey University
thesis.degree.levelMasters
thesis.degree.nameMaster of Construction Management (M.Con.Mgt.)


Files in this item

Icon
Icon

This item appears in the following Collection(s)

Show simple item record