On mathematical modelling of the self-heating of cellulosic materials : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Mathematics at Massey University, New Zealand

Loading...
Thumbnail Image
Date
1991
DOI
Open Access Location
Journal Title
Journal ISSN
Volume Title
Publisher
Massey University
Rights
The Author
Abstract
This thesis considers mathematical modelling of self-heating of cellulosic materials, and in particular the effects of moisture on the heating characteristics. Following an introductory chapter containing a literature review, Chapter 2 presents some preliminary results and an industrial case study. The case study, which discusses a 'dry' body self-heating on a hot surface, investigates the following questions : (i) how hot can the surfa e get before ignition is likely? (ii) how well does the (slab like) boy approximate to an infinite slab? and (iii) how valid is the Frank Kamenetskii approximation for the source term? It is shown that the minimal stea dy state temperature profile is stable when the temperature of the hot surface is below a certain critical value, and bounds for the higher steady state profile are derived. Chapter 3 presents the thermo dynamic derivation of a reaction-diffusion model for the self-heating of a moist cellulosic body, including the effects of direct chemical oxi dation as well as those of a further exothermic hydrolysis reaction and the evaporation and condensation of water. The model contains three main variables: the temperature of the body, the liquid water concentration in the body, and the water vapour concentration in the body. Chapter 4 investigates the limiting case of the model equations as the thermal conductivity and diffusivity of the body be come large. In particular it is shown that, in this limiting case, the model can have at least twenty-five distinct bifurcation diagrams, compared with only two for the well known model without the effects of moisture content. In Chapter 5 the maximum principle and the methods of upper and lower solutions are used to derive existence, uniqueness and multiplicity results for the steady state solutions of the spatially distributed model. Finally, in Chapter 6, existence and uniqueness results for the time dependent spatially distributed model are derived.
Description
Keywords
Sponteneous combustion, Heat of combustion, Cellulose, Combustion, Mathematical models, Mathematics
Citation