Show simple item record

dc.contributor.authorMander, Susan M.
dc.date.accessioned2014-11-19T01:45:21Z
dc.date.available2014-11-19T01:45:21Z
dc.date.issued2014
dc.identifier.urihttp://hdl.handle.net/10179/5907
dc.description.abstractLight-emitting diode (LED) MR16 lamps have recently become part of the residential lighting market, bringing with them a new lighting paradigm. Consumers previously accustomed to halogen MR16 technology must now select suitable LED replacements based on their photometric information. In the wake of stories of exaggerated lumen outputs and inaccurate marketing literature, this research takes a snapshot of MR16 LED residential lighting in New Zealand to evaluate its status. Forty-eight readily available products (six repetitions of eight types) were tested in Massey University's integrating sphere. Initial investigations focused on baseline photometric values to determine whether claims of halogen equivalency were justified and if manufacturers’ photometric information was valid. Lamp quality was checked using ENERGY STAR as a basis, and variation across each six-lamp sample was checked to determine whether consistency could be assured to the consumer. The effect of heat on LEDs was investigated through a 6,000 hour test. This saw groups of lamps running continuously in both downlights and free air in a simulated residential installation in Auckland, New Zealand. As well as analysing whether such mounting arrangements caused different levels of non-recoverable deterioration over time, the study also considered the general behaviour of all lamps over the test period. The study had mixed results, and revealed that care must be taken when purchasing MR16 LED lamps in New Zealand due to these varied levels of quality. Significantly, one lamp type was found to mechanically deteriorate over time such that it proved a fire risk. This was exacerbated by high temperature and the lamps mounted in downlights deteriorated 2,000 hours before their free air equivalents showed signs of similar behaviour. With 25% of the lamps sampled in the study shown to be seriously flawed, it is clear that appropriate regulation is required in order to ensure that MR16 LED lamps sold in New Zealand are fit for purpose. The study concludes by suggesting further areas for research which were limited by time constraints. All of these proposed investigations would enrich the existing findings.en_US
dc.language.isoenen_US
dc.publisherMassey Universityen_US
dc.rightsThe Authoren_US
dc.subjectLight emitting diodesen_US
dc.subjectLED lightsen_US
dc.subjectElectric light evaluationen_US
dc.subjectHalogen equivalencyen_US
dc.titleMR16 LED retrofit lamps : quality, consistency and reliability : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Environmental Technology & Sustainable Energy at Massey University, Albany, New Zealanden_US
dc.typeThesisen_US
thesis.degree.disciplineEnvironmental Technology and Sustainable Energyen_US
thesis.degree.grantorMassey Universityen_US
thesis.degree.levelMastersen_US
thesis.degree.nameMaster of Engineering (M.E.)en_US


Files in this item

Icon
Icon

This item appears in the following Collection(s)

Show simple item record