Study on an integrated system of rapid prototyping and manufacturing for 3D Digitizer to CNC Mill : a thesis presented in partial fulfilment of the requirements for the degree of Master in Technology at Massey University, Palmerston North, New Zealand

dc.contributor.authorLi, Jinghui
dc.date.accessioned2018-10-19T00:10:06Z
dc.date.available2018-10-19T00:10:06Z
dc.date.issued2002
dc.description.abstractThe main purpose of this project is to develop a low cost, effective, user friendly interface software for staff and students to integrate the designing and manufacturing facilities in the Institute of Technology and Engineering (ITE) at Massey University, Palmerston North, New Zealand. The project involves establishment of an integrated CAD/CAM/CAE system, the identification of software requirements, selection of software development tool kit, definition of hardware configuration, software development and final experiments and tests. ITE has a laboratory, where are equipped with one CNC milling machine, one CNC lathe, one Injection Moulding machine, one desktop 3D scanner and one 3D plotter. In addition, all the CAD/CAM/CAE software have been installed on the PCs. Based on the analysis and utilisation of these existing facilities, it is found that they are not smoothly integrated; no linkage between the CAD/CAM/CAE system and desktop Rapid Prototyping facilities; file formats used by each of the system are not compatible. Through this project, the investigation of the possibility to integrate the system and the feasibility to develop a software to bridge the 3D scanner and the CNC mill, was carried out. A first try was successfully made using Borland C++5.0 to convert the 3D scanned data into NC program. Then, using Borland C++ Builder 5.0 created a user-friendly interface for conversion of 3D Digitizer to CNC Mill. Next, the different scales of wax models were satisfactorily processed on the CNC milling machine by inputting the converted NC program.en_US
dc.identifier.urihttp://hdl.handle.net/10179/13870
dc.language.isoenen_US
dc.publisherMassey Universityen_US
dc.rightsThe Authoren_US
dc.subjectEngineering -- Data processingen_US
dc.titleStudy on an integrated system of rapid prototyping and manufacturing for 3D Digitizer to CNC Mill : a thesis presented in partial fulfilment of the requirements for the degree of Master in Technology at Massey University, Palmerston North, New Zealanden_US
dc.typeThesisen_US
massey.contributor.authorLi, Jinghui
thesis.degree.disciplineManufacturing and Industrial Technologyen_US
thesis.degree.grantorMassey Universityen_US
thesis.degree.levelMastersen_US
thesis.degree.nameMaster of Technology (M. Tech.)en_US
Files
Original bundle
Now showing 1 - 2 of 2
Loading...
Thumbnail Image
Name:
01_front.pdf
Size:
1.16 MB
Format:
Adobe Portable Document Format
Description:
Loading...
Thumbnail Image
Name:
02_whole.pdf
Size:
11.64 MB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
3.32 KB
Format:
Item-specific license agreed upon to submission
Description: