Preparation, characterisation and application of naturally derived polar lipids through lipolysis : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Technology at Massey University, Palmerston North, New Zealand
| dc.contributor.author | Sofian-Seng, Noor-Soffalina | |
| dc.date.accessioned | 2017-06-13T22:27:46Z | |
| dc.date.available | 2017-06-13T22:27:46Z | |
| dc.date.issued | 2016 | |
| dc.description.abstract | Monoglycerides are lipid based emulsifiers extensively used for their broad technical function in the food industry. Commercial monoglycerides are generally manufactured through chemical synthesis; however, lipolysis of triglycerides by lipase enzyme provides a biochemical pathway by which monoglycerides may be produced. This is particularly appealing for consumers for whom all natural and clean labelled food products are a particular driver. Accordingly, rather than replacing monoglycerides from formulations with other types of emulsifiers (and that may lack the requisite functionality), an alternative approach may be to develop a non-chemical and more natural pathway to produce the emulsifier, thereby allowing the particular monoglyceride functionality to be retained within products. Therefore, this study was conducted to investigate the feasibility of using lipase enzyme as a processing tool to synthesise polar lipids, namely monoglycerides, in situ of the manufacture of whippable food emulsions, such as cream and ice cream. This concept idea was initially proven viable through interfacial tension (IFT) measurements obtained using a straight-forward surface characterisation technique. R. miehei lipase was found to competitively bind at the interface of vegetable oils-water and that the adsorbed protein (sodium caseinate and whey protein isolate) or surfactant layer (lecithin and Tween 80) did not act as a barrier to lipase adsorption at the oil-water interface. IFT measurements were also able to demonstrate the progressive accumulation of polar lipids at the oil-water interface arising from lipolysis, and were additionally used to indicate how thermal treatment of the enzyme could be used to terminate activity. In considering how the requisite functionality could be achieved for whippable emulsion formulations, emulsion droplet size, type of emulsifiers used as well as lipase concentration were shown to be key variables by which the extent and rate of lipolysis could be manipulated and controlled. The results showed that formulation (emulsifier types and oil content) and processing conditions (Microfluidizer® pressure and number of passes) had significant effects on the emulsion droplet size. As part of controlling the extent of lipolysis, the conditions by which the reaction could be terminated were investigated by measuring the viability of R. miehei lipase against thermal treatment. Results showed that the R. miehei lipase was thermostable up to temperatures of 70 °C. Above this temperature, substantial reduction of the residual activity occurred. However, even elevated temperature of between 90 and 100 oC did not immediately inactivate the lipase, with heating for ~ 2 min required before activity was no longer detected. In terms of emulsion stability, the palm oil emulsion tested in this study was found to be thermostable up to 100 oC, thus allowing development of a thermalisation step that was able to inactivate the enzyme without compromising the stability of the emulsion. The shear stability analyses on lipolysed O/W emulsion showed the lipolysed emulsions were susceptible to shear-induced aggregation, and that the degree of aggregation could be manipulated as a consequence of controlling the extent of lipolysis through either enzyme concentration or holding time. The drastic increase in the viscosity curve between the nonlipolysed and lipolysed emulsion suggested that the shear–induced partial coalescence was primarily due to the lipolysis reaction and was not as a result of the high fat content (30 %). The findings elucidate the ability of the generated polar lipids in the emulsion to displace the existing sodium caseinate adsorbed layer, thus compromising emulsion stability upon shearing. The quantification of synthesised polar lipids from the triglyceride component of fat droplets by the lipolysis reaction showed a mixture of fatty acids, di- and mono-glycerides being produced. Palmitic acid was observed to be the main liberated fatty acids. While, monoolein and monopalmitin were the most prominent monoglycerides, with measured concentrations of 3.755 ± 0.895 and 1.660 ± 0.657 mg / g fat respectively after 15 min with lipase concentration of 50 mg /g fat. The relative concentration of polar lipids produced was found to be dependent on the lipase concentration as well as time of lipolysis. Furthermore, up to 30 min of lipolysis (concentration 50 mg /g fat) were seen to have no observable effect on the droplet size distribution of the emulsion suggesting that quiescently stable emulsions could be produced. The results show the importance of controlling reaction conditions (both enzyme concentration and reaction time) in order to provide requisite functionality without excessively destabilising emulsions such that droplet structuring can occur under quiescent conditions. The generation of monoglycerides at quantum satis levels able to impart critical functionality was demonstrated in whipped cream and ice cream. The addition of R. miehei lipase at very low concentration of 5 mg /g fat was able to produce a rigid and stable whipped cream with overrun exceeding 100 %. However, good stability of the whipped cream over time was achievable with concentration above 10 mg /g fat. Similarly, ice cream made with the addition of 5 mg /g fat exhibited good melt stability and firmness. The findings proved the feasibility of in situ production of polar lipids, namely monoglycerides and fatty acids, in replicating the functionality imparted by commercial monoglycerides in whippable emulsions. Thus, the findings in this thesis offer an alternative biochemical pathway for the generation of polar lipids to that of commercially available monoglycerides, which are currently produced synthetically. The potential for using this approach as part of the processing step for food emulsion manufacture has also been demonstrated. The concept can be tailored for various emulsion based food products. | en_US |
| dc.identifier.uri | http://hdl.handle.net/10179/11208 | |
| dc.language.iso | en | en_US |
| dc.publisher | Massey University | en_US |
| dc.rights | The Author | en_US |
| dc.subject | Monoglycerides | en_US |
| dc.subject | Lipolysis | en_US |
| dc.subject | Emulsions | en_US |
| dc.subject | Food Technology | en_US |
| dc.subject | Research Subject Categories::TECHNOLOGY::Chemical engineering::Food technology | en_US |
| dc.title | Preparation, characterisation and application of naturally derived polar lipids through lipolysis : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Technology at Massey University, Palmerston North, New Zealand | en_US |
| dc.type | Thesis | en_US |
| massey.contributor.author | Sofian Seng, Noor | en_US |
| thesis.degree.discipline | Food Technology | en_US |
| thesis.degree.grantor | Massey University | en_US |
| thesis.degree.level | Doctoral | en_US |
| thesis.degree.name | Doctor of Philosophy (PhD) | en_US |
Files
License bundle
1 - 1 of 1
Loading...
- Name:
- license.txt
- Size:
- 3.32 KB
- Format:
- Item-specific license agreed upon to submission
- Description: