Lumber moisture measurement using a six-port reflectometer and waveguide aperture array : a thesis submitted in fulfilment of the requirements for the degree of Master of Engineering, Massey University

Simple item page
dc.contributor.authorHolmes, Wayne S.
dc.date.accessioned2013-08-04T22:00:06Z
dc.date.available2013-08-04T22:00:06Z
dc.date.issued2013
dc.description.abstractThis Thesis covers the development of a six-port and slotted waveguide based measurement system for the determination of the variation of moisture content (mc) of stacked lumber. A Six-port reflectometer was developed and used throughout the trials incorporating an automatic calibration system. This was implemented using switched coaxial standards, producing improvement in the long term stability of the six-port. In addition the measurement of the dielectric properties of the typical lumber types of Heartwood, Sapwood and internal Branches is examined. Measurements were made using the waveguide cell technique covering the frequency range of 2.3 to 6.5GHz. Additional work was undertaken to establish a method to correct these measurements for variations in basic density and Earlywood \Latewood banding, giving rise to a potential moisture content estimation error of 0.63%. Both an explicit first order model and multivariate regression analysis of the sensor was proposed and experimental results presented for lumber mc spanning the range of 10 to 180% by dry basis. From these trials a mc measurement error of 3% for the explicit model and 2% for regression of individual boards covering the sensor was determined without incorporating density effects.en
dc.identifier.urihttp://hdl.handle.net/10179/4707
dc.language.isoenen
dc.publisherMassey Universityen_US
dc.rightsThe Authoren_US
dc.subjectWaveguideen
dc.subjectLumber moisture contenten
dc.subjectTimber moisture contenten
dc.subjectWood moisture contenten
dc.subjectReflectometeren
dc.subjectSix-port reflectometeren
dc.subjectPermittivityen
dc.titleLumber moisture measurement using a six-port reflectometer and waveguide aperture array : a thesis submitted in fulfilment of the requirements for the degree of Master of Engineering, Massey Universityen
dc.typeThesisen
massey.contributor.authorHolmes, Wayne S.en
thesis.degree.disciplineEngineeringen
thesis.degree.grantorMassey Universityen
thesis.degree.levelMastersen
thesis.degree.nameMaster of Engineering (M.E.)en
Files
Original bundle
Now showing 1 - 2 of 2
Thumbnail Image
Name:
01_front.pdf
Size:
239.5 KB
Format:
Adobe Portable Document Format
Description:
Download
Thumbnail Image
Name:
02_whole.pdf
Size:
2.9 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
804 B
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Theses and Dissertations