Browsing by Author "Rashidinejad A"
Now showing 1 - 8 of 8
Results Per Page
Sort Options
- ItemAssessment of Various Food Proteins as Structural Materials for Delivery of Hydrophobic Polyphenols Using a Novel Co-Precipitation Method(MDPI (Basel, Switzerland), 2023-04-19) Rashidinejad A; Nieuwkoop M; Singh H; Jameson GB; Papetti AIn this study, sodium caseinate (NaCas), soy protein isolate (SPI), and whey protein isolate (WPI) were used as structural materials for the delivery of rutin, naringenin, curcumin, hesperidin, and catechin. For each polyphenol, the protein solution was brought to alkaline pH, and then the polyphenol and trehalose (as a cryo-protectant) were added. The mixtures were later acidified, and the co-precipitated products were lyophilized. Regardless of the type of protein used, the co-precipitation method exhibited relatively high entrapment efficiency and loading capacity for all five polyphenols. Several structural changes were seen in the scanning electron micrographs of all polyphenol-protein co-precipitates. This included a significant decrease in the crystallinity of the polyphenols, which was confirmed by X-ray diffraction analysis, where amorphous structures of rutin, naringenin, curcumin, hesperidin, and catechin were revealed after the treatment. Both the dispersibility and solubility of the lyophilized powders in water were improved dramatically (in some cases, >10-fold) after the treatment, with further improvements observed in these properties for the powders containing trehalose. Depending on the chemical structure and hydrophobicity of the tested polyphenols, there were differences observed in the degree and extent of the effect of the protein on different properties of the polyphenols. Overall, the findings of this study demonstrated that NaCas, WPI, and SPI can be used for the development of an efficient delivery system for hydrophobic polyphenols, which in turn can be incorporated into various functional foods or used as supplements in the nutraceutical industry.
- ItemExploring efficient extraction methods: Bioactive compounds and antioxidant properties from New Zealand damson plums(Elsevier Ltd, 2023-10) Xia P; Ahmmed MK; Rashidinejad AThe study determined the best extraction method for phenolic compounds (rutin, catechin, epicatechin, naringenin, neochlorogenic acid, and rosmarinic acid) in the New Zealand damson plums. Accelerated solvent extraction (ASE) using ethanol and water was used to evaluate the solvent efficacy. Further comparisons were made among ASE, ultrasound-assisted extraction (UAE), enzyme-assisted extraction (EAE), and a combined method (E + UAE) using water as the solvent. The findings showed that ASE for 40 min was the most effective method for extracting phenolic compounds (1.76 mg gallic acid equivalent/g) compared to other methods (UAE = 1.17, EAE = 1.3, and E + UAE = 1.45 mg/g). The ASE method also resulted in an extract with a higher antioxidant activity than other methods. The extraction time over 40 min decreased the yield regardless of the solvent used. Therefore, the ASE extraction method for 40 min is recommended as the best method for extraction of phenolic compounds from the New Zealand damson plums.
- ItemFlavonoid delivery systemRashidinejad A; Harjinder S; Simon L; Alejandra A-F; Abby T; Zhigao NThe invention relates to a flavonoid delivery system comprising a co-precipitate of a hydrophobic flavonoid and a protein. The flavonoid delivery system comprises a high ratio of flavonoid to protein, allowing food products to be fortified with relatively large amounts of flavonoid without compromising the sensory properties of the food product.
- ItemMarine Fish-Derived Lysophosphatidylcholine: Properties, Extraction, Quantification, and Brain Health Application(MDPI (Basel, Switzerland), 2023-03-30) Ahmmed MK; Hachem M; Ahmmed F; Rashidinejad A; Oz F; Bekhit AA; Carne A; Bekhit AE-DA; Jembrek MJ; Šegota SLong-chain omega-3 fatty acids esterified in lysophosphatidylcholine (LPC-omega-3) are the most bioavailable omega-3 fatty acid form and are considered important for brain health. Lysophosphatidylcholine is a hydrolyzed phospholipid that is generated from the action of either phospholipase PLA1 or PLA2. There are two types of LPC; 1-LPC (where the omega-3 fatty acid at the sn-2 position is acylated) and 2-LPC (where the omega-3 fatty acid at the sn-1 position is acylated). The 2-LPC type is more highly bioavailable to the brain than the 1-LPC type. Given the biological and health aspects of LPC types, it is important to understand the structure, properties, extraction, quantification, functional role, and effect of the processing of LPC. This review examines various aspects involved in the extraction, characterization, and quantification of LPC. Further, the effects of processing methods on LPC and the potential biological roles of LPC in health and wellbeing are discussed. DHA-rich-LysoPLs, including LPC, can be enzymatically produced using lipases and phospholipases from wide microbial strains, and the highest yields were obtained by Lipozyme RM-IM®, Lipozyme TL-IM®, and Novozym 435®. Terrestrial-based phospholipids generally contain lower levels of long-chain omega-3 PUFAs, and therefore, they are considered less effective in providing the same health benefits as marine-based LPC. Processing (e.g., thermal, fermentation, and freezing) reduces the PL in fish. LPC containing omega-3 PUFA, mainly DHA (C22:6 omega-3) and eicosapentaenoic acid EPA (C20:5 omega-3) play important role in brain development and neuronal cell growth. Additionally, they have been implicated in supporting treatment programs for depression and Alzheimer's. These activities appear to be facilitated by the acute function of a major facilitator superfamily domain-containing protein 2 (Mfsd2a), expressed in BBB endothelium, as a chief transporter for LPC-DHA uptake to the brain. LPC-based delivery systems also provide the opportunity to improve the properties of some bioactive compounds during storage and absorption. Overall, LPCs have great potential for improving brain health, but their safety and potentially negative effects should also be taken into consideration.
- ItemOptimizing catechin extraction from green tea waste: Comparative analysis of hot water, ultrasound-assisted, and ethanol methods for enhanced antioxidant recovery(Wiley Periodicals LLC, 2024-04-08) Athirojthanakij W; Rashidinejad AThis study aimed to develop an efficient method for the extraction of bioactive compounds from green tea waste (GTW) toward its potential application in the food industry. GTW, which is generated during the harvesting and processing of green tea products, accounts for a global annual loss of nearly 1 million tonnes. Notably, this waste is rich in polyphenolic compounds, particularly catechins, which are renowned for their significant health benefits. We assessed the optimization of catechin extraction from GTW employing hot water extraction (HWE), ultrasound-assisted extraction (UAE), and ethanol extraction (EthE) techniques at different sample-to-solvent ratios (1:100, 1:50, and 1:20 w/v). The extraction temperature was set at 80°C for both HWE and UAE; however, for EthE, the temperature was slightly lower at 70°C, adhering to the boiling point of ethanol. High-performance liquid chromatography was used to determine the extraction efficiency by quantifying various catechins (i.e., catechin, epicatechin [EC], epicatechin gallate [ECG], epigallocatechin [EGC], and epigallocatechin gallate [EGCG]). In terms of the concentration for individual catechins, EC was found to be the highest concentration detected, ranging from 30.58 ± 1.17 to 37.95 ± 0.84 mg/L in all extraction techniques and ratios of solvents, followed by EGCG (9.71 ± 1.40–20.99 ± 1.11 mg/L), EGC + C (7.95 ± 0.66–12.58 ± 0.56 mg/L), and ECG (1.85 ± 0.71–6.05 ± 0.06 mg/L). The findings of DPPH (2,2-diphenyl-1-picryl-hydrazyl) free radical assay illustrated that HWE demonstrated the highest extraction efficiency at all ratios, ranging from 61.41 ± 1.00 to 70.36 ± 1.47 mg/L. The 1:50 ratio exhibited the highest extraction yield (25.98% ± 0.75%) compared to UAE (24.16% ± 0.95%) and EthE (22.59% ± 0.26%). Moreover, this method of extraction (i.e., HWE) produced the highest total catechins and %DPPH reduction. Consequently, HWE was the most efficient method for extracting catechins from GTW, underscoring its potential for valorizing waste within the food manufacturing industry.
- ItemPotential benefits of Moringa peregrina defatted seed: Effect of processing on nutritional and anti-nutritional properties, antioxidant capacity, in vitro digestibility of protein and starch, and inhibition of α-glucosidase and α-amylase enzymes(Elsevier Ltd, 2022-10) Sardabi F; Azizi MH; Gavlighi HA; Rashidinejad AThis study aimed to eliminate the bitter taste of Moringa peregrina press cake (MPC) as a byproduct of oil extraction (by employing safe and conventional methods) and evaluating its potential for formulating value-added food products. The characteristics (nutritional and anti-nutritional properties, monosaccharide composition, in vitro starch and protein digestibility, antioxidant capacity, and in vitro α-glucosidase, and α-amylase inhibitory activity) of raw, debittered (soaked in distilled water and boiled), and roasted (after debitterization) MPC flours were determined. Debitterization significantly increased total protein, fiber, arabinose, xylose, antioxidant activity, in vitro protein digestibility, and α-amylase inhibitory activity, whereas it decreased total starch, resistant starch, starch digestibility, ash, glucose, phytic acid, tannin, and oxalate contents. Fiber content, protein digestibility, α-amylase inhibitory activity, and antioxidant activity were further increased as the result of roasting. MPC and its products could inhibit α-amylase activity, with the highest inhibition belonging to roasted debittered samples. The current study is the first to report on the comprehensive nutritional and bio- and physicochemical aspects of Moringa peregrina press cake and the effect of treatments on improving its sensorial, nutritional, and health-promoting properties. Therefore, these results indicate the potential of treated MPC as a novel natural functional ingredient for various food formulations.
- ItemRecent advances in the conjugation approaches for enhancing the bioavailability of polyphenols(Elsevier Ltd, 2024-01) Sahraeian S; Rashidinejad A; Golmakani M-TIn recent years, the consumption of functional foods containing health-beneficial ingredients has become increasingly popular. Polyphenols are among the most important functional and bioactive molecules found in a variety of fresh produce and food products. However, the limited solubility of most polyphenols in water can significantly affect their bioavailability, thereby reducing their potential health benefits. To overcome this limitation, various approaches have been explored, including molecular enhancers, nanoparticles, encapsulation systems, and conjugation methods. In this review, we focus on recent advances in conjugation methods for enhancing the bioavailability of polyphenols. We provide a concise overview of the types of polyphenols and bioavailability determination methods and, subsequently, discuss the concept of conjugation methods, including different synthesizing methods, confirmation procedures, and the effects of conjugation on polysaccharides and polyphenols. Overall, this review provides a comprehensive update on recent advances in conjugation methods that can be used to improve the bioavailability of polyphenols and highlights the potential of these approaches to enhance the health benefits of polyphenol-rich foods.
- ItemThe Effect of pH and Sodium Caseinate on the Aqueous Solubility, Stability, and Crystallinity of Rutin towards Concentrated Colloidally Stable Particles for the Incorporation into Functional Foods(MDPI (Basel, Switzerland), 2022-01-14) Rashidinejad A; Jameson GB; Singh H; Papetti APoor water solubility and low bioavailability of hydrophobic flavonoids such as rutin remain as substantial challenges to their oral delivery via functional foods. In this study, the effect of pH and the addition of a protein (sodium caseinate; NaCas) on the aqueous solubility and stability of rutin was studied, from which an efficient delivery system for the incorporation of rutin into functional food products was developed. The aqueous solubility, chemical stability, crystallinity, and morphology of rutin (0.1-5% w/v) under various pH (1-11) and protein concentrations (0.2-8% w/v) were studied. To manufacture the concentrated colloidally stable rutin-NaCas particles, rutin was dissolved and deprotonated in a NaCas solution at alkaline pH before its subsequent neutralisation at pH 7. The excess water was removed using ultrafiltration to improve the loading capacity. Rutin showed the highest solubility at pH 11, while the addition of NaCas resulted in the improvement of both solubility and chemical stability. Critically, to achieve particles with colloidal stability, the NaCas:rutin ratio (w/w) had to be greater than 2.5 and 40 respectively for the lowest (0.2% w/v) and highest (4 to 8% w/v) concentrations of NaCas. The rutin-NaCas particles in the concentrated formulations were physically stable, with a size in the range of 185 to 230 nm and zeta potential of -36.8 to -38.1 mV, depending on the NaCas:rutin ratio. Encapsulation efficiency and loading capacity of rutin in different systems were 76% to 83% and 2% to 22%, respectively. The concentrated formulation containing 5% w/v NaCas and 2% w/v rutin was chosen as the most efficient delivery system due to the ideal protein:flavonoid ratio (2.5:1), which resulted in the highest loading capacity (22%). Taken together, the findings show that the delivery system developed in this study can be a promising method for the incorporation of a high concentration of hydrophobic flavonoids such as rutin into functional foods.