Show simple item record

dc.contributor.authorMurray, Phillip Edward
dc.date.accessioned2010-08-19T00:07:01Z
dc.date.availableNO_RESTRICTIONen_US
dc.date.available2010-08-19T00:07:01Z
dc.date.issued2005
dc.identifier.urihttp://hdl.handle.net/10179/1566
dc.description.abstractThe deregulation of the electricity supply industry in New Zealand has led to an increased level of interest in the security of electricity supply to rural communities. This in turn has led to questions about sustainable alternatives to conventional methods of electricity supply. A solution may be the adoption of sustainable community sized renewable energy (RE) based distributed generation systems. However, choosing between the myriad of possibilities requires much data and analysis. An accurate analysis of electricity load and RE resource matching is normally required. In most cases, this is an expensive and time-consuming assessment. In order to minimise these costs, and yet give due consideration to stakeholder preferences and technical uncertainty, a process incorporating the economic, social, environmental, and technical aspects of sustainable design in a relatively short timeframe will be required. This study developed such a method through the integrated use of the wind atlas assessment and analysis program (WAsP), the micropower optimisation model (HOMER), and three methods of decision analysis using Logical Decisions for Windows (LDW) software, which formed the decision analysis framework, SPiRAL (Sustainable Power in Rural Areas and Locations). The efficacy of the integrated use of the software in the SPiRAL framework was tested through two analyses using electricity load and RE resource data from a case study site. The first was an analysis using a full-year of data in a multi-method decision analysis process thus setting the framework in place. A further analysis then tested the minimum monitoring time required to obtain and analyse the data for modelling meaningful results. In both analyses, the results were ranked based on stakeholder preferences between the economic, social, environmental, and technical aspects of sustainable energy systems. The clear representation of the uncertainty of the electricity loads and the RE resources was paramount in the results. The short-term analysis results differed in small ways from the full-term, but were essentially similar. This study developed a decision analysis framework that delivered transparent results in a manner likely to instil insight and confidence in them, and this would provide the decision-maker with much valuable information on which to base their decision.en_US
dc.language.isoenen_US
dc.publisherMassey Universityen_US
dc.rightsThe Authoren_US
dc.subjectElectricity supplyen_US
dc.subjectSustainable energyen_US
dc.subject.otherFields of Research::290000 Engineering and Technology::290900 Electrical and Electronic Engineering::290901 Electrical engineeringen_US
dc.titleDesigning sustainable distributed generation systems for rural communities : an application of optimisation modelling and decision analysis to include sustainability concepts and uncertainty into design optimality : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Agricultural Engineering (Renewable Energy) at Massey University, Palmerston North, New Zealanden_US
dc.typeThesisen_US
thesis.degree.disciplineAgricultural Engineering (Renewable Energy)en_US
thesis.degree.grantorMassey Universityen_US
thesis.degree.levelDoctoralen_US
thesis.degree.levelDoctoralen
thesis.degree.nameDoctor of Philosophy (Ph.D.)en_US


Files in this item

Icon
Icon

This item appears in the following Collection(s)

Show simple item record