Hybrid deposition additive manufacturing: novel volume distribution, thermo-mechanical characterization, and image analysis

Loading...
Thumbnail Image
Date
25/08/2022
Open Access Location
Journal Title
Journal ISSN
Volume Title
Publisher
The Brazilian Society of Mechanical Sciences and Engineering
Rights
Abstract
The structural integrity of additive manufacturing structures is a pronounced challenge considering the voids and weak layer-to-layer adhesion. One of the potential ways is hybrid deposition manufacturing (HDM) that includes fused filament fabrication (FFF) with the conventional filling process, also known as “HDM composites". HDM is a potential technique for improving structural stability by replacing the thermoplastic void structure with a voidless epoxy. However, the literature lacks investigation of FFF/epoxy HDM-based composites regarding optimal volume distribution, effects of brittle and ductile FFF materials, and fractographic analysis. This research presents the effects of range of volume distributions (10–90%) between FFF and epoxy system for tensile, flexure, and compressive characterization. Volume distribution in tensile and flexure samples is achieved using printable wall thickness, slot width, and maximum width. For compression, the printable wall thickness, slot diameter, and external diameter are considered. Polylactic acid and acrylonitrile butadiene styrene are used to analyze the brittle and ductile FFF structures. The research reports novel application of image analysis during mechanical characterization using high-quality camera and fractographic analysis using scanning electron microscopy (SEM). The results present surprising high tensile strain (0.038 mm/mm) and compressive strength (64.5 MPa) for lower FDM-percentages (10%, 20%) that are explained using in situ image analysis, SEM, stress–strain simulations, and dynamic mechanical analysis (DMA). In this regard, the proposed work holds novelty to apply DMA for HDM. The optimal volume distributions of 70% and 80% alongside fractographic mechanisms for lower percentages (10%, 20%) can potentially contribute to structural applications and future material-based innovations for HDM.
Description
(c) The Author/s
CAUL read and publish agreement 2022
Keywords
Fused filament fabrication, Additive manufacturing, Mechanical characterization, Dynamic mechanical analysis, In situ image analysis, Scanning electron microscopy, Hybrid deposition manufacturing
Citation
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44
Collections