Significant factors affecting the forced-air cooling process of polylined horticultural produce : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Food Technology at Massey University, Palmerston North, New Zealand

Thumbnail Image
Open Access Location
Journal Title
Journal ISSN
Volume Title
Massey University
The Author
New Zealand is the world’s third biggest producer of kiwifruit, with 94 % of the kiwifruit produced exported (NZ $ 1.0 bn in 2014). Forced-air cooling of the produce (from the harvest temperature of about 20 °C to near storage temperature of 0 °C) immediately after harvest improves storage potential and maintains produce quality before transportation to market. The design of the kiwifruit packaging system influences the rate of cooling and temperature achieved, mainly by affecting the airflow within and throughout the package. The typical kiwifruit package contains 10.5 kg of fruit and consists of a cardboard box and polyliner bag to prevent the loss of moisture and fruit shrivelling. Individual boxes are assembled onto pallets (10 boxes to a pallet layer, 10 layers high) Open areas or vents (in the box) facilitate cooling by allowing cool air to enter and circulate throughout the package. In forced-air cooling pallets are assembled into double rows with an aisle between the rows. Cool air is sucked through the pallets by a fan in the aisle, cooling the fruit and warming the air. The air is then either blown or ducted to the refrigeration system to be re-cooled. The polyliner keeps the local humidity high near the fruit, preventing weight loss due to evaporative cooling, but, as a barrier to direct fruit to air contact, slows the cooling rate. This project investigated the impact of operating conditions and package design on the cooling performance in such systems. A numerical model was developed (a CFD model implemented using the Fluent CFD software) that describes and predicts the temperature profiles of palletised kiwifruit packages undergoing forced-air cooling. The capability of the model to predict the fruit temperatures in each package was quantitatively validated against experimental data. The numerical model was able to predict temperature profiles within experimental error bars over 14 h of cooling. The numerical model was used to determine the operating point (in terms of pressure drop and flowrate across the pallet) to ensure rapid cooling of the produce without incurring excessive operational costs due to the power requirements. Results from both experimental work and the numerical model informed that there was an effective limit to the volumetric flowrate of 0.243 L kg-1 s-1: flowrates in excess of the limit had no or little effective benefit. This threshold flowrate is below the typical range recommended in industry for the forced-air cooling of non-polylined horticultural produce, which is 0.5 – 2.0 L kg-1 s-1. The numerical model demonstrated that the overall cooling performance (cooling rate, uniformity, power consumption and pallet throughput per week) can be improved by controlling the airflow distribution between the fastest and slowest cooling kiwifruit packages. An alternative design that channels cool air through the pallet towards the slowest cooling packages, located at the back of the pallet, by using two package designs in the same pallet, was presented. At 0.243 L kg-1 s-1 it was found that the pressure drop and power required to achieve equivalent cooling rates with the new design was reduced (by 24 % each) compared to the conventional design. Additionally, at the half-cooling time the cooling uniformity was improved by 19 %. The key features of the new design can be expected to be applicable for the cooling of horticultural produce involving an inner packaging liner.
Kiwifruit, Cooling, Postharvest technology