Design and development of a web roll-to-roll testing system with lateral dynamics control of displacement guide : a thesis in partial fulfilment of the requirement for the degree of Masters of Engineering in Mechatronics, Massey University, Palmerston North, New Zealand

Simple item page
dc.contributor.authorTsai, Sung-Yu
dc.date.accessioned2013-08-07T23:54:46Z
dc.date.available2013-08-07T23:54:46Z
dc.date.issued2012
dc.description.abstractRoll-to-Roll (R2R) systems have been widely used in the traditional paper printing and packaging industry. In addition, Roll-to-Roll systems are also considered as a cost effective mass production solution for printed electronics, such as RFID and Solar cells in the recent years [1]. In a Roll-to-Roll system, web material often experiences lateral motion during the transportation to processes [1]. This project presents the lateral dynamics control system integration using centred pivoted displacement guide for Roll-to-Roll application. An initial literature review of the project is carried out with supporting theory and web handling mechanism. The complete system design consists of four units, namely unwinder unit, load cell unit, guide unit and rewinder unit. In this project, two microcontrollers are proposed to control the four units with additional instrumentation and signal conditioning between sensors/actuators, and the controller. The Guide system dynamics are simulated using first order single degree-of-freedom oscillator model controlled with classical PID servo designs. Finally, the complete system is tested with different disturbances input to the system. The system lateral response is compared with and without the guide system. Results are shown to have reduced the lateral motion when media transport speeds are at 20m/min, 40m/min and 60m/min.en
dc.identifier.urihttp://hdl.handle.net/10179/4724
dc.language.isoenen
dc.publisherMassey Universityen_US
dc.rightsThe Authoren_US
dc.subjectRollers (Printing)en
dc.subjectAutomatic controlen
dc.subjectDesign and constructionen
dc.subjectPrintingen
dc.titleDesign and development of a web roll-to-roll testing system with lateral dynamics control of displacement guide : a thesis in partial fulfilment of the requirement for the degree of Masters of Engineering in Mechatronics, Massey University, Palmerston North, New Zealanden
dc.typeThesisen
massey.contributor.authorTsai, Sung-Yuen
thesis.degree.disciplineMechatronicsen
thesis.degree.grantorMassey Universityen
thesis.degree.levelMastersen
thesis.degree.nameMaster of Engineering (M.E.)en
Files
Original bundle
Now showing 1 - 2 of 2
Thumbnail Image
Name:
01_front.pdf
Size:
415.94 KB
Format:
Adobe Portable Document Format
Description:
Download
Thumbnail Image
Name:
02_whole.pdf
Size:
7.5 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
804 B
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Theses and Dissertations